55 Pack 4-1/2 Inch Cut-Off Wheels Metal Stainless Steel Discs for Angle Grinder

eBay PRETEC PROFESSIONAL CUT-OFF WHEELS 55-Pack 4-1/2" Ultra-Thin Metal Cutting Discs Ultra-thin cutting wheels for fast, controlled cut-off work on stainless steel, carbon steel, steel pipe, rebar, sheet metal and more. 55 TOTAL CUTTING WHEELS 50 Standard Wheels + 5 Bonus Wheels WORKSHOP VALUE PACK More Wheels, Fewer Reorders The 55-piece pack provides a practical supply for welders, mechanics, fabricators, contractors and frequent DIY users without requiring a full commercial bulk order. Product Specifications Total Quantity 55 Cutting Wheels Pack Configuration 50 Standard Wheels + 5 Bonus Wheels Wheel Diameter 4-1/2 in / 115 mm Wheel Thickness .040 in / 1 mm / 1/25 in Arbor Hole 7/8 in / 22.23 mm Maximum Rated Speed 13,300 RPM / 80 m/s Wheel Style Type 1 Flat Cut-Off Wheel Abrasive Material Aluminum Oxide Abrasive Blend Compatible Tool Compatible 4.5" Angle Grinders with a 7/8" Arbor Engineered for Efficient Metal Cutting Ultra-Thin .040" Cutting Profile The 1 mm ultra-thin profile creates a narrow cutting path with less resistance than thicker general-purpose wheels. This supports faster cut-off work, reduced material loss and less excessive burr formation. Double Fiberglass Mesh Reinforcement The wheel structure uses reinforced fiberglass mesh to improve strength and operating stability during high-speed cutting when correctly mounted and used according to the grinder manufacturer's instructions. Reinforced Metal Center Ring The metal arbor ring helps maintain the shape of the center opening and supports stable contact with a compatible angle grinder flange. Aluminum Oxide Abrasive Blend The aluminum oxide abrasive blend provides consistent cutting action on stainless steel, carbon steel, mild steel and other common ferrous metal applications. 55-Piece Shop and DIY Value Pack Includes 50 standard wheels plus 5 bonus wheels, providing a useful balance between small starter packs and large commercial bulk quantities. Why Choose a 1 mm Ultra-Thin Wheel? A thinner wheel removes less material during each cut and typically requires less cutting pressure than a thicker cut-off wheel. Faster Cutting Reduced cutting resistance supports quicker cut-off work. Narrower Kerf The narrow profile helps reduce unnecessary material loss. Better Control Lightweight cutting action supports controlled straight cuts. Recommended Cutting Applications Designed primarily for stainless steel and common ferrous metals. Stainless Steel Carbon Steel Mild Steel Steel Pipe Rebar Sheet Metal Angle Iron Metal Tubing Steel Rod and Bolts Suitable for Professional and Home Workshops Professional Use Welding, metal fabrication, automotive repair, equipment maintenance, construction and general workshop cutting. DIY and Home Repair Cutting metal brackets, steel pipe, fencing, bolts, frames, sheet metal and other common home workshop materials. Check Your Angle Grinder Before Ordering These cutting wheels are designed for compatible 4.5-inch angle grinders that use a 7/8-inch arbor. Verify the following before use: The grinder accepts 4.5-inch Type 1 cut-off wheels. The grinder uses a compatible 7/8-inch arbor and mounting flange. The grinder speed does not exceed the wheel rating of 13,300 RPM. The correct cut-off wheel guard is installed. Package Includes 55 × PRETEC 4.5" Ultra-Thin Cut-Off Wheels Pack configuration: 50 standard cutting wheels plus 5 bonus wheels. Important Safety Information Always wear safety glasses, a face shield, hearing protection, gloves and suitable protective clothing. Always use the correct angle grinder guard and mounting flange. Inspect every wheel before installation. Do not use wheels that are cracked, chipped, wet, dropped or otherwise damaged. These ultra-thin discs are intended for straight cut-off work only. Do not use them for side grinding. Do not twist, bend, jam or apply excessive side pressure to the wheel. Follow all instructions provided by the angle grinder manufacturer. Frequently Asked Questions Is this a 50-pack or a 55-pack? You will receive 55 cutting wheels in total: 50 standard wheels plus 5 bonus wheels. Can these wheels cut stainless steel? Yes. They are designed for stainless steel, carbon steel, mild steel and other common ferrous metal applications. Can they be used for surface grinding? No. These are ultra-thin cut-off wheels intended for straight cutting only. Do not apply side pressure or use them for grinding. Will they fit every 4.5-inch angle grinder? They fit compatible 4.5-inch angle grinders that use a 7/8-inch arbor and operate within the wheel's rated speed. Check your tool specifications before ordering. Keep Your Workshop Ready with PRETEC Choose the 55-piece value pack for fast metal cutting, fewer reorders and dependable everyday workshop supply. #pack #inch #cut #off #wheels #metal #ad #tahabay #ebay